I'd replace it with a new stock volume pump while your in there.....if you
feel the need to...
Hi-volume pumps require a oil pump drive with a hardened tip.......
and they cost HP!
Ron-
'01 Dakota Sport 4wd
3.9 Blown / Nitroused
Best Qtr 15.452@91.24
290 RWHP / 284 RWTQ
----- Original Message -----
From: "kc8lbn" <kc8lbn@comcast.net>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Thursday, July 24, 2003 6:58 PM
Subject: DML: High Volume Oil Pump?
>
> I am replacing my rear main seal next weekend and I figured I would
replace
> my oil pump since it has to come off anyway. Should I stick with the stock
> output or use the high volume one? Truck is a 95 5.2 91,000 miles oil
> pressure hot at idle is 20-28lbs 70 mph hot is 60lbs.
>
> --
>
>
> Jason Bates
> kc8lbn@comcast.net
>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:39 EST