B&M said "No"....that's all that is required.
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Mike
Meyerhoff
Sent: Tuesday, August 05, 2003 9:18 PM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: Trans fluid
This is my take on atf+ fluids.... If B&M trick shift (or any fluid)
meet chryslers criteria it would say so. Not stating compatibility
costs B&M
money, so they would do it if they could. I guarentee they compared
the
properties of each of thier products with mopar's criteria and labeled
the ones that meet the criteria.
Now not all mopar trannies are the same, and which ones push which
criteria limits of the fluid properties isn't something anyone on this
board is qualified to know. It would take someone from Mopar's chemlab
and a pile of tranny testing data to tell us that.
So you might be allright, blending 5 quarts of trickshift with 10
mopar...
it just depends. If you do 2nd change with 5 quarts now you have less
mopar... maybe your out of spec :( Too much of a guesswork on a $1600
piece of gears.
mm
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:45 EST