that list for a caddy with air injected ?
I don think mine is air injected
----- Original Message -----
From: "Bernd D. Ratsch" <bernd@texas.net>
To: <dakota-truck@dakota-truck.net>
Sent: Saturday, August 23, 2003 10:23 AM
Subject: DML: RE: Re: RE: Re: RE: Cat question
>
> Should be a 94016 (2.5" IN/OUT)
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Chad Evans
> Sent: Saturday, August 23, 2003 10:14 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: Re: RE: Re: RE: Cat question
>
>
>
> single in/out
>
>
> ----- Original Message -----
> From: "Bernd D. Ratsch" <bernd@texas.net>
> To: <dakota-truck@dakota-truck.net>
> Sent: Saturday, August 23, 2003 10:10 AM
> Subject: DML: RE: Re: RE: Cat question
>
>
> >
> > Dual IN/Single OUT or Single IN/OUT configuration on your truck?
> >
> > - Bernd
> >
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Chad
> > Evans
> > Sent: Saturday, August 23, 2003 9:45 AM
> > To: dakota-truck@dakota-truck.net
> > Subject: DML: Re: RE: Cat question
> >
> >
> >
> > bernd you have the part number for the carsound for my truck. 2.5 "
> > would be good ?
> >
> >
> > ----- Original Message -----
> > From: "Bernd D. Ratsch" <bernd@texas.net>
> > To: <dakota-truck@dakota-truck.net>
> > Sent: Friday, August 22, 2003 8:48 PM
> > Subject: DML: RE: Cat question
> >
> >
> > >
> > > Matt,
> > >
> > > If the Carsound cat doesn't have the fitting for the forward O2, you
> > > can have any local muffler shop put an O2 bung right before the cat
> > > (in the pipe).
> > >
> > > - Bernd
> > >
> > > -----Original Message-----
> > > From: owner-dakota-truck@bent.twistedbits.net
> > > [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Matt
> > > Grose
> > > Sent: Friday, August 22, 2003 7:23 PM
> > > To: dakota-truck@dakota-truck.net
> > > Subject: DML: Cat question
> > >
> > >
> > >
> > > My cat is very close to be totally shot and I want to replace it as
> > > well as the entire exhaust system. I was under the truck today and
> > > noticed that the
> > > read O2 sensor is screwed into the cat. Will I need to drill a hole
> in
> > > the
> > > new cat for the O2 sensor? The new cat is a Car Sound Hi-Flow Cat I
> > got
> > > from Bernd's shop before it closed down. If I need to drill a hole
> > what
> > > size should it be? Sorry for the stupid question but I am fairly new
> > to
> > > doing mods to the truck. Mostly I have down bolt on's and nothing
> > > much
> >
> > > technical. Thanks in advance.
> > >
> > > -Matt Grose
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:53 EST