Will someone please tell me what a PDC is?
""Mallett, Donald B"" <Donald.Mallett@BNSF.com> wrote in message
news:0F45A7A5E62CD211B8CC0008C7A402F013BCD78C@ftwntexmp002.bnsf.com...
:
: <SNIPED>Good info and ideas stirred up here!
: <SNIPED> Myrecent research has turned up the figures of 2500 cfm at low
: speed and 4000
: cfm at high speed.
: <SNIPED>Upgrading the alt to PDC and PDC to Batt cable is a good idea (6ga
: up to 2 or 0ga)--you will be happy.
:
: <SNIPED>Ken in Simi Valley, CA
:
: Yea All great info! Thanks guys. I did up the cables from the alt to PDC
and
: PDC to Batt to 2 or 0GA (can't remember at this time)and the ground wire
: from BAT to truck before the fan went in. Using 8GA for the power and
ground
: wiring for the viper fan.
:
: As far as the viper fan using power from the motor via the alt. Yea it
does.
: But less then the old stock clutch and ele. fan combined. Also take in the
: fact the viper fan is OFF when not needed. Such as when the motor is cold
: and trying to warm up. More so in the winter!!! Also at hi-way speeds,
Don't
: know about you guys but my engine compartment stays cleaner! Lots not
forgot
: the noise if that stock fan. Lots of more room to work on the front end of
: the engine too.
:
: I have updated my web page about my fan...
: www.mallettservices.com/y2kota.com. The link is down on the left side. I
: need to rebuild that home baddddd!
:
: --
: *------------------------------Y2KOTA------------------------------*
: Don Mallett
: Y2K QC 4.7L Auto SLT+
: http://www.mallettservices.com/y2kota.html
: *----Yea, its only a truck; But it's my truck! Now get over it!----*
:
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:57 EST