I'm using this kit on mine........works great with 10lbs boost and a 75
shot!.........my stock original gave up with 5-6lbs Boost!
I used a set of standard grade 8 bolts and lock washers 5/16 course thread
as I recall.......
Ron-
'01 Dakota Sport 3.9 4WD
Street,Strip,and Show
----- Original Message -----
From: <Gmblows@aol.com>
To: <dakota-truck@dakota-truck.net>
Sent: Thursday, September 11, 2003 10:44 PM
Subject: DML: RE: Modified intake and Throttle Body
>
> They were probably thinking about saving money.
> I had mine replaced under warrantee.
>
> > Ah....makes sense now. So basically, throw away your original (steel)
> > plate and bolt on the aluminum one instead. ;)
> >
> > BTW: The new intake manifold gaskets do NOT come with new bolts.
> > There
> > is an update from Chrysler (DC) to reuse the factory bolts. Why....I
> > don't know what they were thinking. However, you can order the new
> > bolts (or just order the Mopar Performance Intake kit).
> >
> > - Bernd
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:58 EST