RE: Time to take a look...

From: Rick Barnes (barnesrv@comcast.net)
Date: Mon Sep 15 2003 - 11:39:59 EDT


The clunk on my 98 were the A arm nuts, specifically on the driver's side.

Rascal

-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of BARRY OLIVER
Sent: Monday, September 15, 2003 11:31 AM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: Time to take a look...

If you find it, tell me where to look, apparently I still havent found
the REAL source of my noise...

>>> Donald.Mallett@BNSF.com 09/14/03 03:30AM >>>

If the weather holds up, I'm going to put the front end up on ramps and
look
for the source of a unknown clunk, knock, rattle or whatever it is
coming
from the front end. This "noise" happens when going over bumps. It
feels
like something is loose down there. Had the Dak into the dealer for the
TX
State inspection, Yea it PASSED! Told them about it, they took a fast
look
and found nothing that stuck out like a sore thumb.

Any thing I should be looking for or at? Any advice would be helpful
here!

--
*------------------------------Y2KOTA------------------------------*
Don Mallett
Y2K QC 4.7L Auto SLT+
http://www.mallettservices.com/y2kota.html 
http://www.dakota-truck.net/profiles/dakota/QwkvWz@DAJFf6/profile.htm 
*----------------------GRAB LIFE BY THE HORNS----------------------*



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:58 EST