something with a 1.5 pitch (metric).
Best bet is a helicoil kit from NAPA.
TonyC
-----Original Message-----
From: Mike Goodell <mikgoo@charter.net>
To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
Date: Thursday, September 18, 2003 9:36 PM
Subject: DML: GenIII Front Brake Q's
>
>Anybody happen to know what size the threads are
>for the caliper retaining pins?
>The previous owner of my 99 managed to cross thread
>the bottom pin in the passenger side caliper and I am
>hoping I can chase the threads to repair it with out having
>to replace the steering knuckle.
>
>Mike G.
>99 Dak SLT
>mikgoo@charter.net
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:59 EST