The picture looks like the Aluminum Magnim heasd sold by MP.
Hmm, wonder who was making them for MP?
TonyC
-----Original Message-----
From: greg conner <dodgeboy93@hotmail.com>
To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
Date: Thursday, November 06, 2003 2:29 PM
Subject: DML: New from eldebrock
>
>New for 2004, looks like the magnum aftermaket is expanding more and more
>even after its production death.
>
>Performer RPM Chrysler Magnum Heads
>Match with Our New RPM Air-Gap Manifold Designed for 1992 & later 5.2L (318
>c.i.d.) and 1993 & later 5.9L (360 c.i.d.) Chrysler Magnum V8s, the
>Performer RPM Chrysler Magnum heads give substantial performance
>improvements for street/strip and off-road performance use. They offer an
>easy bolt-on upgrade for these modern engines with substantial
>out-of-the-box performance gains. Stock Magnum intake and exhaust flange
and
>port locations make this an ideal choice for use with the new RPM Air-Gap
>manifold #7577. These heads feature 180cc intake ports and 75cc exhaust
>ports with 58cc combustion chambers for a slight increase in compression
>over the factory heads. 2.02" intake and 1.60" exhaust valves with 11/32"
>stems offer more flow than stock and they accept adjustable aftermarket
>rocker arms. Sold individually.
>
>Heads for Chrysler 5.2L & 5.9L Magnum engines Bare Complete
>Performer RPM Chrysler Magnum 61769* 61779*
>
>_________________________________________________________________
>Concerned that messages may bounce because your Hotmail account is over
>limit? Get Hotmail Extra Storage! http://join.msn.com/?PAGE=features/es
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:07 EST