My dad always told me that at a 3 foot measurement from bumper to wall
lights should hit approximately 8-10 inches lower then their measuerment
from the ground to beam center all of course setting on level ground.
hth,
Bill Day
billday@consolidated.net
http://users.consolidated.net/billday/
A rich man isn't always wealthy, he just has all the love he wants and can
give..
AIM - BadManD73 (Catch me if you can!)
'95 Ext Cab 3.9L Mag 4x4 Flame Red
----- Original Message -----
From: "andy levy" <andy-dml@levyclan.us>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Tuesday, November 18, 2003 7:15 PM
Subject: Re: DML: headlamps
>
> droo wrote:
>
> > Yeah yeah yeah. Unfortunately the wall is only good for getting the
> > lights pointed at the same height. Can never tell how it will look on
> > the road.
>
> Doesn't the manual give measurements for where the beams should be?
>
> --
> -andy
>
> http://home.twcny.rr.com/andylevy/dakota - andy-dml@levyclan.us
> --------------------------------------------
> "Whatever Adam does, do the opposite and you'll be fine"
> -Bob Tom
> --------------------------------------------
>
--- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.541 / Virus Database: 335 - Release Date: 11/14/03
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:08 EST