Ok Mike,
Sounds like you're having fun! Its not a '93, but I have a '96 FSM if you
need any pages scanned or anything looked up if you think it might help.
Just let me know.
Rich
-----Original Message-----
From: mikeplayerca@yahoo.ca [mailto:mikeplayerca@yahoo.ca]
Sent: Thursday, December 04, 2003 10:11 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: RE: Heater ducting
Rich
I do have vacuum coming in from the engine, I have at least 1 actuator
moving
when I change the settings, but I'm not sure what it is supposed to change.
Like I said, I've had the control box apart (lots of little springs in
there)
and it seems fine. What I can see of the vacuum lines also seems OK. I'm
thinking maybe a stuck damper door.
MIke
In article
<3BDD58DB53320C4D91038B11445B77625398BE@CHNTEXCHANGE.chnt.gd-ns.com>,
Rich.Wisotzkey@gd-ns.com ("Wisotzkey, Rich") writes:
>
>
> Mike,
> Have you checked your vacuum lines?
> Rich - Ashbrn, VA
>
> -----Original Message-----
> From: mikeplayerca@yahoo.ca [mailto:mikeplayerca@yahoo.ca]
> Sent: Thursday, December 04, 2003 9:24 AM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: DML: Heater ducting
>
>
>
> I'm having trouble with the controls for my heating/cooling system of my
93
> Dakota. I can't switch from panel discharge to heater or defrost (kind of
> critical at this time of year) I've already had the control box
apart and
> it
> seems fine. Now I'm looking at the ducting. Hello dashboard removal.
>
> Does anyone have a schematic for the controls and or diagram showing the
> ducting and control doors.
>
> thanks
> Mike
>
> mikeplayera@yahoo.ca
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:11 EST