Double nut? It's a bolt---
I've stopped 1,497 spam messages. You can too!
One month FREE spam protection at http://www.cloudmark.com/spamnetsig/
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Rick
Barnes
Sent: Sunday, December 07, 2003 7:12 AM
To: dakota-truck@dakota-truck.net
Subject: RE: DML: RE: Headers question
Put a double nut on that one.
Rascal
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
srp@cox.net
Sent: Sunday, December 07, 2003 2:17 AM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: RE: Headers question
Easiest way for me, hood up, left knee on bumper, lean straight over the
battery-- tighten that back one no problem-- a shortie 3/8s and snug
them
well-- that back one seems to be the one that gives the most trouble
staying
tight for most...
Sam
www.socaldakota.com
619-274-1292
>
> From: "John Neff" <jndneff@texas.net>
> Date: 2003/12/06 Sat PM 09:52:41 EST
> To: "Dakota Mailing List" <dakota-truck@dakota-truck.net>
> Subject: DML: RE: Headers question
>
>
> I'm 6'1" with large hands. I reach in with a short wrench and turn
them :)
> It's tight, but I get to all of the bolts from the top. The drivers
side
> rear requires me to reach in abover and behind the power steering
booster.
> Put the torque wrench back in the tool chest. There's no room for it.
Just
> get them as tight as you can with a short combination wrench.
>
> John
>
> >Ok, for those of you that have put on Headers, how the heck do you
get to
> >the Exhaust Manifold bolts???
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:12 EST