> -----Original Message-----
> <snip> I know that in general you start at the farthest wheel from the
> master
> cylinder and work to the closest. Does anyone know the proper bleeding
> order for a quadcab?<snip>
>
>
> The 2K FSM says to do it in this order:
>
> Master Cylinder
> Combination Valve
> Rear Anti-lock Valve
> Right Rear
> Left Rear
> Right Front
> Left Front
>
> HTH,
>
> Bob Smith (DAKSY2K on AIM)
Ummm, I believe that sequence is for when you replace the master cylinder or
do a full flush. For a basic brake bleeding, all three of my FSM's ('92,
'00, '02) recommend just RR, LR, RF, LF. I've always done it that way with
no ill effects.
RayB
http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:13 EST