Thanks for the input. Any idea who makes the spacers? His truck is not
lowered.
TonyC
-----Original Message-----
From: B1LLYW@aol.com <B1LLYW@aol.com>
To: aol@dakota-truck.net <aol@dakota-truck.net>
Date: Friday, April 09, 2004 6:18 PM
Subject: DML: R/T rims on a Gen II - Install issues?>
>I've heard of two issues. One is rubbing on the spindles. That does not
>seem to be an issue if you run drop spindles. The other issue is the
center
>caps. You have flatten out the grease caps some to get the center caps to
fit.
>
>Bill White - KRC Performance
>
>http://www.bionicdodge.com
>
>'95 Dakota CC 4x2 - 408 is done, truck isn't
>'03 Neon R/T - no mods yet
>
>
This archive was generated by hypermail 2b29 : Sat May 01 2004 - 12:00:16 EDT