Re: Holley 12-920 Question....

From: Tony Cellana (acellan1@tampabay.rr.com)
Date: Sun Jul 18 2004 - 13:12:41 EDT


Walbro just makes the pump. Holley or any other comapnay can buy them in
bulk and tweak and repackage them.

I'd expect to find "some" sort of Holley marking on it though.

There are a bunch of S/C 360 guys using this pump without much (if any)
issues.

TonyC

-----Original Message-----
From: jon@dakota-truck.net <jon@dakota-truck.net>
To: dakota-truck-moderator@bent.twistedbits.net
<dakota-truck-moderator@bent.twistedbits.net>
Date: Saturday, July 17, 2004 11:59 PM
Subject: Re: DML: Holley 12-920 Question....

>
> It sounds possible on the surface, but I'd take that advice
>with a large grain of salt. Even though a company may use the
>same case for different products, it still needs to be able to
>differentiate them in order to put them in the right boxes,
>diagnose problems, make repairs, accept returns, and restock, etc.
>I know that if I were the manufacturer, I'd be doing *something*
>to be able to identify them, even if its as lame as applying a
>sticky label to the case. It may very well be that a company tech
>would actually have to pull the case apart and could identify the
>pump by the innards, but that seems unnecessarily cumbersome,
>when it would be so easy to simply mark the case.
>
>
>--
> -Jon-
>
> .-- Jon Steiger ---- jon@dakota-truck.net or jon@jonsteiger.com --.
> | 1970 Barracuda - 1990 Dakota 'vert - 1992 Ram 4x4 - 1996 Dakota |
> | 1996 Intruder 1400 - 1996 Kolb FireFly - 2001 Ram QC 3500 CTD |
> `------------------------------------ http://www.jonsteiger.com --'
>



This archive was generated by hypermail 2b29 : Sun Aug 01 2004 - 00:46:15 EDT