Two phillips screws on the top of the cluster cover (dash cover), pop the
dash off from the radio/glovebox area, and then at the headlight switch
(disconnect the connector right be headlamp switch), drop the steering wheel
down (you may have to remove the top column cover - three T20 torx screws),
and then just pop it out and tilt it away from the radio. There are four
phillips screws that hold the factory radio in place. Take those out and
the radio sldes out (one or two connectors - options specific - on the back
of the radio and then the antenna. Takes about 5 minutes.
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of B1LLYW@aol.com
Sent: Friday, December 03, 2004 1:40 PM
To: aol@dakota-truck.net
Subject: DML: Gen III Head Unit Swap
What's the quick and dirty answer on getting the dash open to swap head
units on my '03?
Bill White - KRC Performance
'03 Dakota R/T, CC, Black, Bone Stock
'04 Liberty, 4x4, 3.7, 5 speed, 3.73 LSD
This archive was generated by hypermail 2b29 : Sat Jan 01 2005 - 11:48:08 EST