No...the bore sizes are different on the V6 (smaller). However, a 50mm (or
modified stock V8 TB) works well on a lightly modified V6 - no bog, no
hesitation, no problems.
You can either change the cable (easier) or drill/replace the linkage on the
TB.
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of James Calder
Sent: Friday, March 25, 2005 11:14 PM
To: dakota-truck@dakota-truck.net
Subject: DML: TB
Speaking of throttle bodies, is a '93 5.2 TB same size as a '93 3.9?
Is a ported '93 318 TB too big for a stock 3.9 (except for a SLIGHTLY more
agressive cam)?
Did I read it would need a cable for it to work?
Yeah, I realize this has been talked about before but it was quicker to type
this than to perform a search :)
Thanks,
James
This archive was generated by hypermail 2b29 : Fri Apr 01 2005 - 00:13:21 EST