Thanks for all the responses. I think I will give the 75s a try and see how it
works on mine. It is a street truck, never goes off road so I think it will be
fine.
In article <077401c57933$78204180$f391c944@aoldsl.net>, awyse@sw.rr.com ("Aaron
Wyse") writes:
>
>
> I was running 235-75-15s on my first Gen II 2wd .. They rubbed the tops of
> the wheel wells on the bumps, and the inside of the bed when articulating
> off road.. But it wasn't bad enough to bother me.. or make me reconsider
> the size to use again. I'm tempted to try and stuff some 30- 9.5s next.
> Aaron
>
> ----- Original Message -----
> From: <B1LLYW@aol.com>
> To: <aol@dakota-truck.net>
> Sent: Wednesday, June 22, 2005 5:35 AM
> Subject: Re: DML: GenII tire options
>
>
> >
> > In a message dated 6/22/2005 12:33:26 AM Eastern Standard Time,
> > kvmac45@comcast.net writes:
> >
> >
> > > Can anybody tell me if 235-75-15s will be OK on a 92 2wd Dak? They will
> be
> > > mounted on stock 15x8 GenIII rims. I don't know if the tires will be too
> > > tall
> > > and rub on anything. Truck has stock suspension still. Thanks.
> > >
> >
> > Yes, too tall. They will rub. 235/70-15 will fit though.
> >
> > Bill White - http://www.revelation320.org
> >
> > '02 Dakota QC Sport Plus, 4x4, 4.7, NV3500, 3.55 LSD, Leather, Sirius, 180
> > t-stat, NGK 2262's, KYB Gas-A-Just Shocks, MBRP Stainless Split Duals,
> > Superchips, HO Cams, MP Air Filter
> >
>
This archive was generated by hypermail 2b29 : Fri Jul 01 2005 - 09:48:06 EDT