"James Calder" <jCalder3@cfl.rr.com> wrote:
: Jon,
: I beleive those are the specs for the intake bolts and not the belly
: (plenun) pan bolts.
: I found the specs in the FSM finaly (but it's not in the Haynes). The last
: step for these is 84 inch pounds.
$&@#$%*@#%!!
Sorry about that; you're absolutely right; what I gave was for the
intake bolts themselves. Dangit. What can I say, I went to a public
school and a state college? Nah, that's too easy. ;-) Anyhoo, yep,
the plenum bolts should be tightened to 24 in-lbs, then 48 in-lbs,
then 84 in-lbs, with a final check at 84 in-lbs. (Each time starting
in the middle and working your way out in a criss-cross pattern.)
My apologies again for my stupid post. One of my pet peeves is
the dissemination of incorrect info and here I go and do exactly that.
:-P
--
-Jon-
.-- Jon Steiger ---- jon@dakota-truck.net or jon@jonsteiger.com --.
| 1970 Barracuda - 1990 Dakota 'vert - 1992 Ram 4x4 - 1996 Dakota |
| 1996 Intruder 1400 - 1996 Kolb FireFly - 2001 Ram QC 3500 CTD |
`------------------------------------ http://www.jonsteiger.com --'
This archive was generated by hypermail 2b29 : Mon Aug 01 2005 - 10:56:27 EDT