That was one thing I questioned when assembling the engine. I had it set at
TDC but wasn't 100% sure if it was on the compression stroke which would
make it 180 off. I'll be sure to check that out too.
Thanks,
James
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Dave
Sent: Tuesday, August 16, 2005 7:33 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Re: Rebuild Won't Start
Does it start and won't stay running? Or won't start at all? If it won't
start at all, double check your distributor, mine was 180* out and wouldn't
start, thought it was at TDC when I put it in, but apparently it wasn't.
-Dave
""James Calder"" <jCalder3@cfl.rr.com> wrote in message
news:200508160155.j7G1tueP001407@ms-smtp-05.tampabay.rr.com...
>
> I just tried to start the rebuilt '93 3.9 tonight and it wouldn't run.
> I ran out of time to set the fuel sync properly. Can it be off so much
> that it would prevent it from running?
>
> Thanks,
> James
>
>
This archive was generated by hypermail 2b29 : Sat Jan 05 2008 - 19:13:05 EST