Jon Slavic said:
>
> the stealer says my lower ball joints need replaced, can this be done or do
> you have to replace the whole control arm?
I've replaced mine a few times. Just use an air hammer to shave the heads
off of the rivets and drive them out. It took me about an hour once I'd
gotten everything dissassembled from the spindle. The ball joints are about
$50 each from Napa.
-- - Josh www.omg-stfu.com
This archive was generated by hypermail 2b29 : Sat Oct 01 2005 - 12:50:23 EDT