There's Gary! Someone grab him fast before he disappears again!
Rascal
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Gary Hedlin
Sent: Sunday, November 20, 2005 12:06 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: Code P1763
clhyer@cox.net wrote:
> Evenin' folks, hope someone can help us. The truck is a '98 V-6 auto; in
drive, it will not move until it hits approx. 1500 RPM and then it drives
normally. If we take off in 1st or 2nd it seems to take off normally and we
can then shift into drive and keep going. It has thrown a code, P1763. Our
FSM (for my '99) says this is "governor pressure sensor volts above rated
volts".
>
> Is this a faulty governor pressure solenoid, or an electrical problem
before it gets to the transmission? It looks like this could be a fix I
might do at home. Anyone done this?
>
> TIA,
> Cal
>
Check the relay in the under-hood fuse box. I had a similar problem with
my 98. If the relay is bad, the trans won't shift properly.
Gary Hedlin
05 4.7 SLT
98 3.9 Sport
This archive was generated by hypermail 2b29 : Thu Dec 01 2005 - 10:10:44 EST