Thanks Gary,
I checked it out, I seen a 20 amp. fuse labeled Trans, it was ok. Didn't see any relays marked anything for the transmission. If I had I wouldn't know how to check it!
Thanks again,
Cal Hyer
> Date: Sun, 20 Nov 2005 00:05:45 -0600
> From: Gary Hedlin <superdak@gmail.com>
> Subject: Re: DML: Code P1763
>
> clhyer@cox.net wrote:
> > Evenin' folks, hope someone can help us. The truck is a '98 V-6 auto; in drive, it will not move until it hits approx. 1500 RPM and then it drives normally. If we take off in 1st or 2nd it seems to take off normally and we can then shift into drive and keep going. It has thrown a code, P1763. Our FSM (for my '99) says this is "governor pressure sensor volts above rated volts".
> >
> > Is this a faulty governor pressure solenoid, or an electrical problem before it gets to the transmission? It looks like this could be a fix I might do at home. Anyone done this?
> >
> > TIA,
> > Cal
> >
> Check the relay in the under-hood fuse box. I had a similar problem with
> my 98. If the relay is bad, the trans won't shift properly.
>
> Gary Hedlin
> 05 4.7 SLT
> 98 3.9 Sport
>
This archive was generated by hypermail 2b29 : Thu Dec 01 2005 - 10:10:44 EST