Why do you think you need to adjust that? Just wondering..(not you
Ryan...the other guy)...
Rascal
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Stew
Sent: Sunday, November 20, 2005 8:10 PM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: RE: Dak doesn't want to stay running
Sorry, been busy with work,school, and my truck.
The ISS screw can be adjusted with an allen wrench via a small hole in the
front of the tb.
-Ryan
99 DA RC R/T
Be careful, to much may damage the TB
----- Original Message -----
From: "Jay & Dana" <jay&dana@telus.net>
To: "DML" <dakota-truck@dakota-truck.net>
Sent: Sunday, November 20, 2005 8:13 PM
Subject: Fw: DML: RE: Dak doesn't want to stay running
>
> This is my second posting and I would still like to know about this ISS
> screw. As I mentioned before I didn't think we could adjust the idle
speeds
> in our Daks. It was also earlier mentioned that the people posting on the
> DML has dropped. Maybe it's because when people ask questions, they get
no
> response.(except for salt on the roads and winter beaters.) Damn, I miss
> Bernd :-)
>
> Jay
>
> ----- Original Message -----
> From: "Jay & Dana" <jay&dana@telus.net>
> To: <dakota-truck@dakota-truck.net>
> Sent: Friday, November 18, 2005 2:33 PM
> Subject: Re: DML: RE: Dak doesn't want to stay running
>
>
> > What is this ISS screw you speak of ? I'm assuming it has to do with
idle
> > speed :-)
> > I did'nt think you could adjust the idle speed on our Dak's (mine's a
97,
> > 318).
> > Mine has always idled at 625 RPM, but I would'nt mind bumping it up a
> > little.
> >
> > -Jay
> >
> >
> >> Haven't touched the ISS screw but I'll bet if I put it up to 800 RPM
this
> >> problem would disapear. does 650 sound about right for a '98 318?
that's
> >> where it's always been but maybe that's a bit low for it's age?
> >
>
>
>
This archive was generated by hypermail 2b29 : Thu Dec 01 2005 - 10:10:44 EST