Re: Oil Pressure Sending Unit wrench

From: Dan Kramarsky (dkramarsky68@yahoo.com)
Date: Mon Dec 05 2005 - 22:28:21 EST


fyi,

I found this place. It was only $6.20 and shipping to CA was much better at $6.47 UPS
Ground.

http://www.pennautotools.com/index.asp?PageAction=VIEWPROD&ProdID=5455&strVarSel=&strCompare=

--- Dan Kramarsky <dkramarsky68@yahoo.com> wrote:

> Any know where to get one for cheap? I searched around and found this was the
> cheapest:
>
> http://www.sjdiscounttools.com/lis13250.html
>
> It fits 1 1/16" oil pressure sending units like the ones on the Magnum
> 3.6L/5.2L/5.9L
> engines.
>
> It's $5.75 and shipping is $10.45. Thats $16.20 total.
>
> I tried toolsource.com, they had a minimum of $25. I tried nationalwholesaletools.com
> and etoolcart.com and all-tool.com. They were slightly more expensive due to
> shipping charges.
>
>
> TIA
>
> -dan
>
> Dan K.
> '92 Grey Dak CC, 318, 4x2, 46RH, 3.55 rear, 235/75R15, PS, PW, PB, PL, AC.
>
> Mods: Cool air, K&N oil/air, 180* T-Stat, Autolite 3924s, re-located IAT, Trans-Go
> shift kit.
>
> Future: Swap motor for a slightly modified Magnum 5.9L engine.
>
>
>
> __________________________________________
> Yahoo! DSL – Something to write home about.
> Just $16.99/mo. or less.
> dsl.yahoo.com
>
>

Dan K.
'92 Grey Dak CC, 318, 4x2, 46RH, 3.55 rear, 235/75R15, PS, PW, PB, PL, AC.

Mods: Cool air, K&N oil/air, 180* T-Stat, Autolite 3924s, re-located IAT, Trans-Go shift kit.

Future: Swap motor for a slightly modified Magnum 5.9L engine.

                
__________________________________________
Yahoo! DSL – Something to write home about.
Just $16.99/mo. or less.
dsl.yahoo.com



This archive was generated by hypermail 2b29 : Sun Jan 01 2006 - 00:39:43 EST