Jon,
I thought I would take a few moments and measure my schrader valve and this is what I
measured with my set of calipers:
Major thread dia: 0.438"
Minor thread dia: 0.382" (could be off by 0.002" on this one)
Pitch: 20 TPI
This would make it very close to 7/16-20 UNF thread. So is my valve a different size
than yours?
-dan
Dan K.
'92 Grey Dak CC, 318, 4x2, 46RH, 3.55 rear, 235/75R15, PS, PW, PB, PL, AC.
Mods: Cool air, K&N oil/air, 180* T-Stat, Autolite 3924s, re-located IAT, Trans-Go shift kit.
Future: Swap motor for a slightly modified Magnum 5.9L engine.
__________________________________
Yahoo! for Good - Make a difference this year.
http://brand.yahoo.com/cybergivingweek2005/
This archive was generated by hypermail 2b29 : Wed Feb 01 2006 - 20:27:15 EST