Hi,
I have a 99 4x4 and was wondering how hard it would be for someone to
replace all the tie rod ends on the front. I have a Right front inner tie
rod going, and since I'll need to get an alignment, I figured that I would
save ~$300 labor and do it myself.
I have done shocks, brakes, and the upper ball joints before... but this one
is new. Any special tools or problems that I would run into? Any tricks
regarding the placement nuts so that the alignment is close to what it was
before I would start?
Thanks!
Chris Reck
Bloomington, IL
'99 Dakota Sport + CC 4x4 V6 (Deep Amethyst)
Shaved and polished V8 TB, Autolite 3923, 195 Thermostat, 7.5mm Bosch plug
wires,
Custom K&N 6x9 air intake, Rancho RSX shocks, Pioneer full audio system,
BF Goodrich 32x11.5r15 T/A KO tires
This archive was generated by hypermail 2b29 : Fri Sep 01 2006 - 10:07:45 EDT