Bob, have you had to replace your cv axles?
Rascal
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of DAKSY
Sent: Saturday, August 26, 2006 5:31 PM
To: dakota-truck@dakota-truck.net
Subject: DML: Re: Rear Brake Line
Hey, Garret
<snip> Has anyone had to replace their rear
brake lines? If so, how much of a pain is it? Also, did you make/bend your
own brake line or were you able to find one premade.<snip>
I just did em on my daughter's 86 LeSabre. NAPA sold me the wrong size, so I
got em at AZ. I hadda bend em by hand.
If you bend reeaaaaaalllllly slowwwllllllllllly, you won't kink them. With
the fittings on the ends, a spring-type tubing bender is pretty much
worthless. If you can find a brake shop, they should do it for cheap...
If you can't a die-type tubing bender will do ya right. I used teflon tape
in the fittings with pretty good results...
HTH<
Bob (DAKSY) Smith
DAKSY2K on AIM
2K SY Dakota Sport +
V-6 4 x 4 5 speed
2K05 HD 883C YP
http://home.nycap.rr.com/daksy/
Averill Park, NY
This archive was generated by hypermail 2b29 : Fri Sep 01 2006 - 10:07:45 EDT