What are the actual cam specs?
Open/Close, LS, Centerline, Duration @.050", etc.
- Bernd
-----Original Message-----
From: Azie L. Magnusson [mailto:maggie11@mchsi.com]
Sent: Tuesday, February 13, 2007 7:56 AM
To: dakota-truck@dakota-truck.net
Subject: DML: Cam limits with EFI
I see all this talk about hi lift cams and 1.7:1 rockers and stronger
springs going on currently and I need some expertise on this matter.
I'm currently in the process of building a '95 360 Magnum for my
'95 CC that currently has a stock and faltering 318 from the
factory. I'd like to run a cam in the neighborhood of 500" lift.
The duration I'd like would be near 300deg.
My Q's are:: What changes are necessary to the EFI system??
Will the stock injectors work?? What throttlebody(if any) should
I change to?? Will the computer and MAP sensor work??
Any and all advise appreciated..
If the cam limits I listed are not compatable with the stock EFI
system, what is your recomendations, and what kind of $'s are
we talking about??
Azie
This archive was generated by hypermail 2b29 : Thu Mar 01 2007 - 00:44:23 EST