Thanks Jon, I think there's 2 switches on the rack? I don't have a FSM for the Neon. How can I tell witch one it is?
- --
*------------------------------Y2KOTA------------------------------*
Don Mallett
Y2K QC 4.7L Auto SLT+ 4x2
http://www.y2kota.us
*-----I'm not late! It's that the rest of the world is early!!-----*
-----Original Message-----
A switch has fixed it everytime for me. Very common failure on PT's.
- -Jon Smith
Mallett, Donald B wrote:
> Cindy's 2000 Neon thought it would be funny to light up the check engine light yesterday. Coming home from celebrating our 25th anniversary the engine light came on 6 miles from home after a 4 day, 300 mile round trip midweek weekend ;-) Pulled the codes and found P1684, no brainier, battery disconnected within the last 50 starts. The 2nd code, P0551, Power Steering Switch Failure - Incorrect input put state detected for the power steering switch circuit. PL: High pressure seen at high speed. I reset the PCM and the codes came back today. Any words of wisdom on where to start with this one? Simple as a bad switch or internal to the power steering rack??
>
>
> - --
> *------------------------------Y2KOTA------------------------------*
> Don Mallett
> Y2K QC 4.7L Auto SLT+ 4x2
> http://www.y2kota.us
> *-----I'm not late! It's that the rest of the world is early!!-----*
>
>
>
>
------------------------------
Date: Sun, 27 May 2007 08:54:07 -0500
From: Terrible Tom <SilverEightynine@aol.com>
Subject: Re: DML: Intake plenum
Zito, James A (GE Infra, Energy) wrote:
> Ok folks '03 3.9 Dak.... Al intake, steel floor that is all oily AGAIN......
>
> Has anyone after market come up with the obvious solution to this problem.....
>
> Mill a bottom for the intake out of the same Al as the rest of the F'ing intake and bolt it up???????
>
>
> If not anyone know the alloy the intake is made from???
>
> Jim
> even with it suckng harder than ever b4 with new plugs it's
> closer than ever to 20 on the highway................
>
Well if you had a V8, I would say throw an M1 intake manifold on there
and be done with it. The belly pan gasket is blown on my Ram, and thats
my once-in-for-all solution.
Since you have the long since aftermarket-ignored 3.9V6 - pull the
intake, and use a bead of The Right Stuff gasket material between the
pan and the upper manifold. That stuff should be the last time you will
have to regasket the belly pan.
- --
- ------------------------------------------------------------
The Zen philosopher Smasho once wrote:
"A truck with no dents, is not a 4x4...
and a 4x4 with no dents wasn't at a DML BBQ"
- ------------------------------------------------------------
three busted-ass daks, a gas hog, and a rollerskate
http://members.aol.com/silvereightynine/
AIM & Yahoo: SilverEightynine
- ------------------------------------------------------------
------------------------------
Date: Sun, 27 May 2007 08:56:23 -0500
From: Terrible Tom <SilverEightynine@aol.com>
Subject: Re: DML: Ketchup chips and the BBQ and New England folks
Zito, James A (GE Infra, Energy) wrote:
> Ok in order.............
>
>
> Tom they have Ketchup (Heinz) chips from Herr's in north NJ.
mmm I'm a Lays Brand kinda guy, but I'm willing to try em hehe
>
> When is the BBQ?????
June 8,9th offically
>
> Who else is in eastern CT, RI or southeast MA???
Walt n Ingrid, Don Rey are all in CT. - Can't think of anyone else off
the top of my head.
- --
- ------------------------------------------------------------
The Zen philosopher Smasho once wrote:
"A truck with no dents, is not a 4x4...
and a 4x4 with no dents wasn't at a DML BBQ"
- ------------------------------------------------------------
three busted-ass daks, a gas hog, and a rollerskate
http://members.aol.com/silvereightynine/
AIM & Yahoo: SilverEightynine
- ------------------------------------------------------------
------------------------------
Date: Sun, 27 May 2007 13:36:33 -0400
From: droo <03dakotacc4.7_4x4@comcast.net>
Subject: DML: HID Headlamps.
I got my headlights from the group buy yesterday. I installed them this
afternoon. They were the high and low beams. They go on, but nothing seems
to change when I put the high beams on. I have all the connetors
connected, etc etc. The lights stay on, the beam just doesn't change. Or
at least I didn't notice and type of mechanical action taking place. I'll
have to see what happens at night. No clue what the problem could be
though.
- --
- -droo
2003 Dodge Dakota Club Cab
V8 4X4 Manual Transmission
Bridgestone Dueler A/T Revo's
Can-Back Soft Topper
Rhinoliner
Alpine CD Head Unit w/ XM
Alpine 6 3/4" Speakers
Sony 8" Subwoofer
Q-Logic Custom Fit Enclosure
------------------------------
Date: Sun, 27 May 2007 10:55:57 -0700 (PDT)
From: Kyle Kozubal <solocamxt@sbcglobal.net>
Subject: DML: Front Grill Questions
I am looking to replace to stock chrome grill/grill
shell on my truck.
http://i106.photobucket.com/albums/m251/D45_2006/Dakota%20Pics/P1010380.jpg
I am wanting to replace it with a black colored shell.
Has anyone ever bought the replacement grills, that
are sold on Ebay? They sell alot of black grills, but
most say they are just primered black.
Or, does anyone know where I can get a cheap factory
painted black grill?
Is swapping the grills easy? It appears like it is
simply bolted-on.
Thanks for any and all info!
Kyle
2004 Dakota Quad Cab SLT
4.7L V8, Auto, 4x4, 3.55 Gears
Flowmaster 3" 40 Series Exhaust
Thru-Body Exhaust, K&N FIPK Intake
Jet Chip Stage II Performance Module
Pro Comp 17X8 Series 8089 Wheels
Yoko Geolander AT+II 265/70R17 Tires (siped)
Leer QXL Cap, Rhino Liner, Billet Fuel Door
APC Clear Corners, Class IV Hitch
Vent Visors, Husky Foor Liners
Windows Tinted, Polk Speakers
------------------------------
Date: Sun, 27 May 2007 13:21:24 -0700
From: Jon Smith <DML@fast4x4.net>
Subject: Re: DML: Intake plenum
Back in the day there was an offering of a 1/4" Al plate, although I
forget who was offering it. I simply went down to a local steel fab
shop with the stock bellypan and had an Aluminum plate made for it.
IIRC, it cost around $75 to have made.
- -Jon Smith
>
>> Ok folks '03 3.9 Dak.... Al intake, steel floor that is all oily
>> AGAIN......
>>
>> Has anyone after market come up with the obvious solution to this
>> problem.....
>>
>> Mill a bottom for the intake out of the same Al as the rest of the
>> F'ing intake and bolt it up???????
>>
>>
>> If not anyone know the alloy the intake is made from???
>>
>> Jim
>> even with it suckng harder than ever b4 with new plugs it's closer
>> than ever to 20 on the highway................
>>
------------------------------
Date: Sun, 27 May 2007 14:24:27 -0700 (PDT)
From: Kyle Kozubal <solocamxt@sbcglobal.net>
Subject: Re: DML: Intake plenum
Doesn't Hughes offer the plate?
Kyle
- --- Jon Smith <DML@fast4x4.net> wrote:
>
> Back in the day there was an offering of a 1/4" Al
> plate, although I
> forget who was offering it. I simply went down to a
> local steel fab
> shop with the stock bellypan and had an Aluminum
> plate made for it.
> IIRC, it cost around $75 to have made.
>
> -Jon Smith
>
> >
> >> Ok folks '03 3.9 Dak.... Al intake, steel floor
> that is all oily
> >> AGAIN......
> >>
> >> Has anyone after market come up with the obvious
> solution to this
> >> problem.....
> >>
> >> Mill a bottom for the intake out of the same Al
> as the rest of the
> >> F'ing intake and bolt it up???????
> >>
> >>
> >> If not anyone know the alloy the intake is made
> from???
> >>
> >> Jim
> >> even with it suckng harder than ever b4 with new
> plugs it's closer
> >> than ever to 20 on the highway................
> >>
>
>
------------------------------
Date: Mon, 28 May 2007 03:43:18 +0000 (UTC)
From: jon@dakota-truck.net
Subject: Re: DML: Intake plenum
Kyle Kozubal <solocamxt@sbcglobal.net> wrote:
> Doesn't Hughes offer the plate?
Yep, I believe they do have one for the V8, but I'm not sure about
the V6.
- --
-Jon-
.- Jon Steiger -- jon@dakota-truck.net or jon@jonsteiger.com -.
| '96 Kolb Firefly, '96 Suzuki Intruder, Miscellaneous Mopars |
`-------------------------------- http://www.jonsteiger.com --'
------------------------------
End of DML Digest V5 #3049
**************************
This archive was generated by hypermail 2b29 : Fri Jun 01 2007 - 09:06:10 EDT
