Re: Engine Stand Mounting

From: Barry Oliver (barrysuperhawk@insightbb.com)
Date: Fri Sep 07 2007 - 22:34:31 EDT


jon@dakota-truck.net wrote:
> Terrible Tom <silvereightynine@aol.com> wrote:
>
>>>1/2" bolts almost always have a 3/4" head. *All* the ones I ever deal
>>>with do.
>>>
>>>Barry could apparently use some small-headed 1/2" bolts and wants to
>>>know where you found them - if indeed you are remembering that thing
>>>that you could never forget correctly :-)
>
>
>>Me - forget something? Who?
>
>
>>Hmmm.... ok I seem to be wrong on the thread - but I know for positive
>>its a 9/6ths head. That must make it what - 7/16ths thread?
>
>
>
> Hmmm, so now its a 1.5" head? ;-)
>
> If you meant 9/16, that would make it a 3/8" bolt, which sounds
> about right. (I would have guessed either 3/8 or 5/16).
>
> 1/4" bolt = 7/16" wrench
> 5/16" bolt = 1/2" wrench
> 3/8" bolt = 9/16" wrench
> 7/16" bolt = 5/8" wrench
> 1/2" bolt = 3/4" wrench
>
>

You know, I knew that y'all knew that it was bad JUJU to correcto Smasho
Tomo Terribilus..



This archive was generated by hypermail 2b29 : Tue Oct 02 2007 - 15:23:18 EDT