What is the BARO reading on the MAP? Should be somewhere in between
28.5-30.x (if it's below 28 or at 31...it's bad - or you are having some
really strange weather).
If it's reading 9-10" - that's way too low.
- Bernd
-----Original Message-----
From: Steve Preston [mailto:steveophonic@yahoo.com]
Sent: Saturday, September 22, 2007 12:35 PM
To: dakota-truck@dakota-truck.net
Subject: DML: MAP sensor
Well,I finally bought a vacuum gauge,and checked my
work truck with it. Judging from actual vacuum,it's
all right. Runs at 18-19 in HG at idle,jumps to zero
when I snap the throttle,climbs to a little over the
idle reading,then settles back to the original
reading. However,my MAP sensor doesn't read close to
this at all. It stays at about 9-10 in HG. Bad
sensor,right?
History lesson: 2003 Dak 3.9 CC 2WD V6 with
42RE,intermittent missing and bad power loss while
driving. TPS ok,new plugs and wires,dist.cap ok,fuel
pressure and all injectors ok.
Thanks!
Steve P.
____________________________________________________________________________
________
Don't let your dream ride pass you by. Make it a reality with Yahoo! Autos.
http://autos.yahoo.com/index.html
This archive was generated by hypermail 2b29 : Tue Oct 02 2007 - 15:23:18 EDT