The BM150 attaches to the top and bottom radiator supports...not the
physical radiator (for your model/year). I do see a problem with the top
though....need to look at an older Dak again.
- Bernd
-----Original Message-----
From: Dan Kramarsky [mailto:dkramarsky68@yahoo.com]
Sent: Tuesday, September 25, 2007 12:28 PM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: RE: Got the March pullies installed.
Bernd ( and others ):
I have this radiator:
1992 Dodge Dakota V8 5.2L, Radiator
http://www.partsamerica.com/ProductDetail.aspx?MfrCode=PCE&MfrPartNumber=431
336&PartType=31&PTSet=A
How does the BM 150 get installed on it? With brackets at top & bottom or
brackets on
the left & right side of radiator?
Will the BM 150 work with my radiator?
-Dan k
>
> Date: Mon, 24 Sep 2007 22:18:45 -0500
> From: "Bernd D. Ratsch" <bernd@dodgetrucks.org>
> Subject: DML: RE: Got the March pullies installed. ( was: FSM and
water pump.... )
>
> Black Magic Extreme 180
> Black Magic 150 (My Favorite)
> Viper Fan w/Dual Relays
> Budget Oriented - 2005 Dodge Dakota 4.7L lightweight Plastic Fan w/viscous
> clutch (6lbs lighter the factory metal fan w/viscous drive system)
>
> - - Bernd
>
Dan K.
Vehicle: 1992 Dakota Club Cab LE Color: Two-tone silver Engine:
5.2L EFI
Options: A/C, Cruise, PS, PB, PW, PL, 3.55 gear, 46RH, tinted rear slider.
Mods: Home-brew CAI, K&N Filters, 180* T-stat, relocated IAT, DynoMax Super
Turbo Exhaust Kit, Hi-Flow Cat, Autolite Platinum plugs, 8mm wires, Gates
hoses and belts.
Photo: http://static.flickr.com/42/84856795_c18903d10f.jpg
Whats Next: Mopar Performance PCM, March pullies, 3.91 rear gear with
LSD, electric fan, KYB shocks, re-paint body, 2/4 drop kit.
____________________________________________________________________________
________
Be a better Globetrotter. Get better travel answers from someone who knows.
Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545469
This archive was generated by hypermail 2b29 : Tue Oct 02 2007 - 15:23:18 EDT
