Re: Infiniti sound system?

From: Steve Preston (steveophonic@yahoo.com)
Date: Mon Oct 15 2007 - 19:04:42 EDT


You have (a) broken solder connection(s) on some
board. Either radio or amp. No doubt about it. You
don't have a failure,or it would stay failed. Broken
connection.

Steve P.

--- DCL <dlaffler@gmail.com> wrote:

>
> Since we're all coming out of our lurk modes I
> figured I'd come out of
> mine...
>
> I have a 2004 quad cab Dak with the Infiniti sound
> system.
>
> Something's wrong with it, it cuts out here and
> there, sometimes for days at
> a time where the radio won't play at all. All the
> connections seem ok when
> I pulled it apart to check.
>
> The consensus I've gotten from some of the folks
> I've talked to around here
> is that the circuit board in the radio itself has
> gone bad, or the amplifier
> for the stereo system has gone bad. Anyone had any
> experience with this? I
> have the opportunity to get the radio out of a 2004
> Dodge Grand Caravan
> (doesn't have the Infiniti system) that's working
> fine, but although the
> radio itself appears to be exactly the same radio I
> don't know where the
> amplifier is, or if it's part of the radio etc.
>
> Thanks!
>
> Dave
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net]
> Sent: Monday, October 15, 2007 12:00 AM
> To: dakota-truck-digest@twistedbits.net
> Subject: DML Digest V5 #3190
>
>
> DML Digest Monday, October 15 2007
> Volume 05 : Number 3190
>
>
>
> The subjects discussed in this digest are:
> ==========
> DML: Interesting potential modification
> RE:DML: Re: Overhead Consoles
> RE: DML: Re: Overhead Consoles
> Re: DML: Interesting potential modification
> RE: DML: Re: Overhead Consoles
> RE: DML: Re: Overhead Consoles
> RE: DML: Re: Overhead Consoles
> Re: DML: Re: Overhead Consoles
> RE: DML: Re: Overhead Consoles
> DML: New 4.7L...WOW!
> Re: DML: Re: Overhead Consoles
> Re: DML: New 4.7L...WOW!
> DML: RE: New 4.7L...WOW!
> RE: DML: Re: Overhead Consoles
> Re: DML: New 4.7L...WOW!
> Re: DML: RE: New 4.7L...WOW!
> RE: DML: Re: Overhead Consoles
> DML: Can I change my overhead console AND my 4.7L ?
>
>
----------------------------------------------------------------------
>
> Date: Sun, 14 Oct 2007 10:11:33 -0400
> From: Jason Bleazard <dml@bleazard.net>
> Subject: DML: Interesting potential modification
>
> http://englishrussia.com/?p=1566
>
> Not that anyone here would ever need anything like
> this...
>
> - --
> Jason Bleazard http://drazaelb.blogspot.com
> Burlington, Ontario
> his: '95 Dakota Sport 4x4, 3.9 V6, 5spd, Reg. Cab,
> white
> hers: '01 Dakota Sport 4x4, 4.7 V8, Auto, Quad Cab,
> black
>
> ------------------------------
>
> Date: Sun, 14 Oct 2007 11:11:38 -0400
> From: "Peter A Athens" <athynz@verizon.net>
> Subject: RE:DML: Re: Overhead Consoles
>
> Coming out of my own lurk mode, I have a related
> question about this: I have
> the factory installed overhead console in my 2000
> Dak, the one with all of
> the compartments including the garage door opener
> compartment which would be
> really sweet if I actually had a garage and a remote
> door opener, however I
> digress. The console, instead of having the display
> that indicates mileage
> and direction, came with some sort of clip that I
> don't even use. Based on
> your experiences would this configuration have all
> the required wiring and
> sensors already installed if I was to somehow manage
> to come up with the
> display part? And would anyone here know how I could
> get my hands on the
> display and how to install it?
>
> Pete
> 2000 CC SLT V6 Flame red/ light driftwood.
> Homemade air intake
> Planning on flowmaster muffler, dual exhaust
>
>
> Date: Sat, 13 Oct 2007 17:24:01 -0400
> From: "Mike Sykes" <mikesykes@cox.net>
> Subject: DML: Re: Overhead Consoles
>
> >>I am looking for an overhead factory console for
> my
> 2004 Dakota Quad Cab<<
>
> Here's what I've learned about this swap:
>
> now, bear in mind that 2004 trucks might be somewhat
> different since it was
> the last model year for the gen III.
>
> from what I've seen in boneyards and when I was
> writing service, if the
> truck didn't come from the factory with the OH
> console, the wiring isn't
> there nor are the sensors. The OH console with the
> trip computer relies on
> several sensors that aren't there unless the OH
> console group was ordered
> from the factory.
> Now, if you just want the overhead console with the
> sweet compartments but
> no incorrect fuel mileage or "give or take a few
> degrees" temperature, that
> one should swap right in =)
>
> ** returns to lurk mode **
>
> - - -miggity
> 00' R/T CC... a mod or two or 9 =)
>
> ------------------------------
>
> Date: Sun, 14 Oct 2007 11:02:10 -0500
> From: "Brian" <hskr@cox.net>
> Subject: RE: DML: Re: Overhead Consoles
>
> No, the wiring is not there. The only time the
> wiring will be there is if
> it came with the trip computer from the factory. I
> had the same set up as
> you on my '00. I installed the trip computer from
> my totaled '99 into it.
> I had to run all the wires from the trip computer to
> the correct spot under
> the dash, and then I took the temp sensor from my
> '99 and put it on my '00.
> Now everything works like factory.
>
> brian cropp
> - -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On
> Behalf Of Peter A Athens
> Sent: Sunday, October 14, 2007 10:12 AM
> To: dakota-truck@dakota-truck.net
> Subject: RE:DML: Re: Overhead Consoles
>
>
> Coming out of my own lurk mode, I have a related
> question about this: I have
> the factory installed overhead console in my 2000
> Dak, the one with all of
> the compartments including the garage door opener
> compartment which would be
> really sweet if I actually had a garage and a remote
> door opener, however I
> digress. The console, instead of having the display
> that indicates mileage
> and direction, came with some sort of clip that I
> don't even use. Based on
> your experiences would this configuration have all
> the required wiring and
> sensors already installed if I was to somehow manage
> to come up with the
> display part? And would anyone here know how I could
> get my hands on the
> display and how to install it?
>
> Pete
> 2000 CC SLT V6 Flame red/ light driftwood.
>
=== message truncated ===

       
____________________________________________________________________________________
Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase.
http://farechase.yahoo.com/



This archive was generated by hypermail 2b29 : Thu Nov 01 2007 - 00:07:06 EDT