Does that include cutting and programming?
BTW..what does FOB stand for (this ought to be good)?
--------------------------------------------------
From: "Bernd D. Ratsch" <bernd@dodgetrucks.org>
Sent: Friday, December 14, 2007 3:35 PM
To: <dakota-truck@dakota-truck.net>
Subject: DML: RE: Re:VIN/key programming
>
> That key (with the built in buttons) runs on average about $150.
>
> - Bernd
>
> -----Original Message-----
> From: Jamie Calder [mailto:JCalder3@cfl.rr.com]
> Sent: Friday, December 14, 2007 2:17 PM
> To: dakota-truck@dakota-truck.net
> Subject: DML: Re:VIN/key programming
>
>
>
> My key is black and has the built in remote entry. Is that the same?
>
> --------------------------------------------------
> From: "Bernd D. Ratsch" <bernd@dodgetrucks.org>
> Sent: Friday, December 14, 2007 11:08 AM
> To: <dakota-truck@dakota-truck.net>
> Subject: DML: RE: RE: VIN/key programming
>
>>
>> About $90 for the SKIM Key (Grey) and normal 1hr charge from "most"
>> dealerships.
>>
>> - Bernd
>>
>> -----Original Message-----
>> From: Jamie Calder [mailto:JCalder3@cfl.rr.com]
>> Sent: Friday, December 14, 2007 8:28 AM
>> To: dakota-truck@dakota-truck.net
>> Subject: DML: RE: VIN/key programming
>>
>>
>>
>> Combo key, 2006 PT, only 1 existing key on hand. What the going rate for
>> the key blank, cut and program?
>> I assume the car needs to be at the dealer for programming? Or can they
>> cut
>> and program the key without
>> the car and I do the cycle-key in- out- wait thing myself?
>> Thanks,
>> James
>
>
>
This archive was generated by hypermail 2b29 : Tue Jan 01 2008 - 00:38:35 EST