You should have 4 screws holding the door panel on. One near the a-pillar
(opper/front of the door panel), one behind the door latch, and two at the
bottom. That's all that is requried to remove the panel (along with the
window crank handle).
- Bernd
-----Original Message-----
From: DAKSY [mailto:rsmith13@nycap.rr.com]
Sent: Thursday, January 17, 2008 9:50 AM
To: dakota-truck@dakota-truck.net
Subject: DML: Re: RE: Re: RE: DAKSY Problem
<> You put the clip back on the handle and when you're ready to
reinstall...just push the handle on the crank shaft until it clicks (doesn't
take much pressure).<>
Gotcha!
<> Screw behind the lock button?<>
Yeah, the FSM shows one back there, holding the upper left (driver's door)
of the panel in position...maybe it's a misprint?
Remember now, I'm the guy on the SHORT bus!
Bob (DAKSY) Smith
DAKSY2K on AIM
2K SY Dakota Sport +
V-6 4 x 4 5 speed
2K05 HD 883C YP
http://home.nycap.rr.com/daksy/
Averill Park, NY
This archive was generated by hypermail 2b29 : Fri Feb 01 2008 - 01:11:51 EST