As Bernd already said, bad caliper. I've seen several on the GenIII Daks
over the years. Just had to replace one on my truck last weekend. It was
the passenger side and was definitly the caliper. The piston on the caliper
was actually damaged and it only pulled when I applied the brake. Bought
new EBC rotors(these things are sweet!!), and loaded re-man calipers for
both sides. I also flushed and bled the entire brake system. My truck
stops better now than it ever did since I bought it used in 2002. And I've
done rotors and pads a couple time already.
Brian
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
josh@stolarz.org
Sent: Thursday, February 14, 2008 10:52 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Brakes Issue
So I replaced the rotors and pads on the front of the truck about a thousand
miles ago and today while driving home one of the front's appears to have
locked up. It was smoking pretty bad and looked really hot as the grease was
bubbling. So what would cause this to happen before I start digging into it,
and am looking at replacing more then the pads and rotor on that side due to
the heat, like the caliper?
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.20.5/1278 - Release Date: 2/14/2008
10:28 AM
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.20.5/1278 - Release Date: 2/14/2008
10:28 AM
This archive was generated by hypermail 2b29 : Sun Mar 02 2008 - 02:10:11 EST