On the '98 you have to get a code reader. The key on/key off trick does not
work.
brian cropp
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of John Dunlap
Sent: Wednesday, May 27, 2009 6:44 PM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: RE: Reset of PCM
What is the advantage of resetting PCM ? Next question is , please
tell me again how do I pull codes from my 98 Dak? On - Off switch,
3 times???
On Fri, May 22, 2009 at 2:59 PM, Bernd D. Ratsch <bernd@dodgetrucks.org>
wrote:
>
> It applies to all vehicles.
>
> - Bernd
>
> -----Original Message-----
> From: Azie L. Magnusson [mailto:maggie11@mchsi.com]
> Sent: Friday, May 22, 2009 2:47 PM
> To: dakota-truck@dakota-truck.net
> Subject: DML: Reset of PCM
>
>
> Bernd writes" >> Disconnect the Negative side of the battery, turn the
key
> to the START position (hold for 10-15 seconds), turn the key OFF,
reconnect
> the battery. This will do a hard reset on the system. <<
>
> Does this apply to the '95 and '89 as well????
> '95 is V8 - '89 is V6. Both automatic.
>
>
> We could certainly slow the aging process down if it had to work its way
> through Congress.
> - Will Rogers
>
> Azie
>
>
>
-- QUOTING... James Bovard"Democracy must be something more than two wolves and a sheep voting on what to have for dinner."
No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.339 / Virus Database: 270.12.42/2137 - Release Date: 05/27/09 07:50:00
This archive was generated by hypermail 2b29 : Mon Jun 01 2009 - 00:37:01 EDT