Or you can do what this video says (not for the faint of heart for the
final solution):
http://www.youtube.com/watch?v=mMp82zLVxoU
On 01/06/2010 08:03 PM, Bob N wrote:
> OK...on my photo bucket.
>
> They are marked new / old......the new has the foam striping all around
>
> http://s15.photobucket.com/albums/a385/bobn/Heater%20Core/
>
> Bob
>
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bernd D.
> Ratsch
> Sent: Wednesday, January 06, 2010 10:33 PM
> To: dakota-truck@dakota-truck.net
> Subject: DML: RE: Evap Coil / Heater Core BERND
>
>
> Sure....snap a pic and send it. I'm betting it'll look like something out
> of a junkyard though. As long as the core is clean, it's not a problem
> though.
>
> - Bernd
>
> -----Original Message-----
> From: Bob N [mailto:bocd@optonline.net]
> Sent: Wednesday, January 06, 2010 7:54 PM
> To: dakota-truck@dakota-truck.net
> Subject: DML: RE: Re: RE: RE: RE: RE: Evap Coil / Heater Core BERND
>
>
> I'd like to see them....I'll sent you a picture of the stock.....and this
> dirty thing that's supposed to be new.....bernd....you wana see it?
>
> Bob
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Chris Reck
> Sent: Wednesday, January 06, 2010 7:15 PM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: DML: Re: RE: RE: RE: RE: Evap Coil / Heater Core BERND
>
>
> I can send you pictures of the ones I got from Rock Auto. They both look
> pretty good to me, but I haven't gotten the old ones out yet.
>
>
> -----------------------------------------------
> Chris Reck
> Bloomington, IL
>
> '99 Dakota Sport + CC 4x4 V6 (Deep Amethyst)
> "It's not the meat, it's how you apply the rub"
>
>
> "Bob N" <bocd@optonline.net> wrote in message
> news:001e01ca8f26$13b4b6a0$3b1e23e0$@net...
>
>> Bernd
>>
>> I ended up getting OE parts from the dealer. The evap core is the exact
>> one
>> I took out as well as the heater core, but the heater core except for new
>> looking foam, it looked used...uglier than the one I took out. I figured
>> it
>> was returned by someone who kept the new and returned their old one. I
>> complained to the dealer and they delivered a new one...damm thing looks
>> the
>> same. You ever see a new one? Does the copper get corroded / festered up
>> by
>> just sitting? I'm afraid to put this thing in. The auto zone one looked
>> new
>> and shiny as did the one nappa but they both looked like they were silver
>> soldered by a blind man and smaller in size as well
>>
>> Bob
>>
>> -----Original Message-----
>> From: owner-dakota-truck@bent.twistedbits.net
>> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bernd D.
>> Ratsch
>> Sent: Sunday, January 03, 2010 10:49 AM
>> To: dakota-truck@dakota-truck.net
>> Subject: DML: RE: RE: RE: Evap Coil / Heater Core BERND
>>
>>
>> It depends....but normally it's Valeo.
>>
>> - Bernd
>>
>> -----Original Message-----
>> From: Bob N [mailto:bocd@optonline.net]
>> Sent: Saturday, January 02, 2010 5:32 PM
>> To: dakota-truck@dakota-truck.net
>> Subject: DML: RE: RE: Evap Coil / Heater Core BERND
>>
>>
>> Bernd
>>
>> Thanks for the reply pal. Do you know who that mfr is? I stopped at
>> autozone
>> today and both the heater and evap core were very crappy. I don't remember
>> the heater core mfr but the evap was Everco 4 Seasons 5804 / 54777.
>>
>> Bob
>>
>> -----Original Message-----
>> From: owner-dakota-truck@bent.twistedbits.net
>> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bernd D.
>> Ratsch
>> Sent: Saturday, January 02, 2010 2:15 PM
>> To: dakota-truck@dakota-truck.net
>> Subject: DML: RE: Evap Coil / Heater Core
>>
>>
>> Napa - They use the same manufacturer and they're about $50 less on the
>> evaporator.
>>
>> -----Original Message-----
>> From: Bob N [mailto:bocd@optonline.net]
>> Sent: Saturday, January 02, 2010 11:34 AM
>> To: dakota-truck@dakota-truck.net
>> Subject: DML: Evap Coil / Heater Core
>>
>>
>> Hey guys,
>>
>> Any input from the guru's here as to whether I should buy dealer items or
>> go
>> to nappa?
>>
>> I normally go to nappa.....but I don't want to chance inferior parts
>> here.....I'm not doing this job again :o(
>>
>> Thanks
>> Bob
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
This archive was generated by hypermail 2b29 : Mon Mar 01 2010 - 00:25:25 EST