RE: Re: upper control arm ?

From: jon petri (jpetri11@yahoo.com)
Date: Tue Feb 02 2010 - 20:09:00 EST


Brian,
    I'm not sure why you have my email address but I am always getting auto repair ideas from you and your buddies and I sure don't know anything about cars so if you could delete me from your forwards I would appreciate it thanks. jpetri11
--- On Mon, j2/1/10, Brian <hskr@cox.net> wrote:

> From: Brian <hskr@cox.net>
> Subject: RE: DML: Re: upper control arm ?
> To: dakota-truck@dakota-truck.net
> Date: Monday, February 1, 2010, 8:39 PM
>
> Yes it should have been adjusted with the alignment.
> Unfortunately,
> alignment shops leaving those nuts loose is a common
> problem.  Take it back
> to the alignment shop and tell them to re-align it and
> watch them to make
> sure they tighten down the nuts.
>
> brian cropp
>
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-
> > truck@bent.twistedbits.net]
> On Behalf Of ffastje
> > Sent: Monday, February 01, 2010 7:42 PM
> > To: dakota-truck@dakota-truck.net
> > Subject: Re: DML: Re: upper control arm ?
> >
> >
> > DAKSY wrote:
> > >
> > > Up & down ONLY.
> > >
> > >
> > > ----- Original Message ----- From: "ffastje"
> <ffastje@cox.net>
> > > To: "DML" <dakota-truck@dakota-truck.net>
> > > Sent: Monday, February 01, 2010 4:18 PM
> > > Subject: DML: upper control arm ?
> > >
> > >
> > >>
> > >> I had the truck aligned but the clunking is
> still there. They said it
> > >> was the brake pad whatever.
> > >> The ? is should the control arm move right
> and left or just up and
> > down.
> > >> When i was doing the ball joints i noticed
> the control arm would move
> > >> right to left and left to right.
> > >>
> > >> --
> > >> Francis Fastje 1999 dakota 3.9 4X4
> > >> 64000 miles
> > >>
> > >
> > >
> > Shouldn't this have been checked with the alignment?I
> went out and
> > tightend it but isn't this going to set off the
> alignment?
> >
> > --
> > Francis Fastje
> > 1999 dakota 3.9 4X4
> > 64000 miles
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 9.0.733 / Virus Database: 271.1.1/2662 -
> Release Date: 02/01/10
> > 06:37:00
>
>

      



This archive was generated by hypermail 2b29 : Mon Mar 01 2010 - 00:25:27 EST