That's what the impact wrench is for...
From: Eric <firstname.lastname@example.org>
Sent: Saturday, June 12, 2010 07:23 PM
To: email@example.com <firstname.lastname@example.org>
Subject: DML: hidden hitch a little narrow
So I have my hitch in place, but the vertical "tabs" that the 7/16
bolt goes through are a little narrow, ~5/16". What I mean is that
if I push the hitch to the left and finger tighten the left bolt,
there is a 5/16" gap between the right tab and the frame rail.
This archive was generated by hypermail 2b29 : Sun Aug 01 2010 - 22:09:08 EDT