is there air coming out of the vent....just not hot? if so could be the
blend door not opening due to a vaccum leak. check the heater core
hoses... are they both hot at idle? or only get hot when the rpm's are
higher. you have a heat gun?
bob
On Wed, Jan 26, 2011 at 9:53 PM, conv442@earthlink.net wrote:
> Strange one here.....
>
> At idle with a nice warm engine get no heat.
> Over 1500 rpm heat rolls in.
>
> Does this sound like I need to flush my cooling system?
> Could it be a water pump on the way out?
>
> Jim
This archive was generated by hypermail 2b29 : Tue Feb 01 2011 - 00:41:10 EST