On Wed, Apr 4, 2012 at 08:42, Barry Oliver <barrysuperhawk@comcast.net> wrote:
>
>
> So, theoretically, we could utilize Nissan wheels or Viper wheels...
IIRC, the backspacing on the Viper rims is really, really deep & might
need some help getting the fit right. According to
http://www.dodgedakotas.com/boards/gen/11888.html , fronts will work
with some rubbing (and you'll need fronts all around).
> Brian Cropp wrote:
>>
>>
>> A few years of the Nissan Frontier also used the 6x4.5" wheels.
>>
>> -----Original Message-----
>> From: owner-dakota-truck@bent.twistedbits.net
>> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Josh Battles
>> Sent: Monday, April 02, 2012 6:48 PM
>> To: dakota-truck@dakota-truck.net
>> Subject: Re: DML: Re: Wheel lug #'s
>>
>>
>> On Apr 2, 2012 11:37 AM, "Mike& Sharon Higgins"<
>> clearcreek@gobrainstorm.net> wrote:
>>>
>>>
>>>
>>> My 1000 Dak has 6 wheel studs. I changed from 5˝" to 6" wheels (from a
>>> Durango) and one of the guys told me that getting replacement wheels
>>> is tough because only the Durango& Dakota use them.
>>>
>>> Go Figure.
>>>
>>
>> The viper also shares the 6x4.5 bolt pattern.
>>
>> Josh
>>
>>
>>
>>
>>
>
This archive was generated by hypermail 2b29 : Tue May 01 2012 - 11:06:10 EDT