as long as you have the IAC out you might as well clean the throttle plates
out too....sometimes they will carbon up pretty nasty to the point where the
throttle plates won't close all the way or it will create a slight vacuum
leak.....this can cause anything from a surgiing or rough idle to a dieing
out condition...if the plates and the bore of the throttle body are real
nasty you can use a very soft brush brush to help with clean up...be
careful...if you scratch the surfaces to the poiunt where it gouges it up you
may end up with the same problem only then having to buy a new throtle
body....which i am sure is not cheap....
Russ
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:33 EDT