The fitting on the bottom of the Edelbrock 1208 is exactly the right size
for the breather hose. Turn the base so that the fitting is on the right
(driver's) side of the engine, cut about 2.5 - 3" off the end of the hose
and slip 'er on. Couldn't be easier. Being paranoid I glued a piece of
gasket material on the bottom of the neck on the Edelbrock to give a leak
free fit. It's that or grease!
Larry
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:37 EDT