I fit two 8 awg through the grommet that is running the wire harness near
the steering shaft. From the engine side it's behind the power brake drum.
But with a well bent hanger, you can get access from the inside of the
cab, pushing the hanger to the outside. Once outside, you can tape and run
cables in.
James Bird BirdJD@InternetMCI.com
'97 Dakota CC, V8, 5sp, 4x4, 3.55 gears, loaded, 500w of serious sound
-----Original Message-----
From: Jack Snodgrass [SMTP:dakota@cybermail.net]
Sent: Thursday, July 10, 1997 9:35 AM
To: Dakota Mailling List
Subject: runnning wires through the firewall
On a 97 Dak... what's the best way to run wires (from the battery for
example) from the engine compartment, through the firewall, into the main
truck cab? Thanks.
Jack - jack@cybermail.net
home (817) 488-4386 / work (972) 516-6270 / fax (817) 481-7182
+=========================================================================+
+ D.A.M - Mothers Against Dyslexia +
+=========================================================================+
+ see www.cybermail.net free/lifetime email and $5 virtual server hosting +
+=========================================================================+
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:47 EDT