STRICKLAND, Tate wrote:
>
> What is the proper torque?
> 97 with 8" factory alloy wheels. Thanks.
> Tate
>
> ----------
> From: jim miller[SMTP:jmiller@eramp.net]
> Sent: Thursday, January 08, 1998 10:32 PM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: 97 brakes
>
> Lord Foul wrote:
>
> > anyone notice pulsing brakes on their Dak within 12,000+- miles??
> > (warped drums/rotors)
>
> I have had that problem on many cars or trucks. Warped rotors can be
> caused by improperly tightened wheels (especially mags). It is not a
> good idea to install lug nuts with a impact wrench but many people do it
> anyway. The proper way is to use a torque wrench set to veichle specs
> and tighten lugs in a proper sequence. Use of a impact sure can warp
> rotors on any veichle.
The Dakota manual states 85 to 110 ft. lbs. for all lug nuts regardless
of rim type. A cris cross tightening sequence is recommended. There is a
cautionary note that states "do not use chrome plated lug nuts with
chrome plated wheels".
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:06 EDT