Well I just installed a Passenger Assist Handle on my 1997. Pretty
easy, you will need the molding, handle, 2 screws and plugs for the
screws (4 different colors so have your parts guy check closly)
Take the old molding off and install the new, it just pulls off.
Center punch the two holes and drill them out, tap using a 1/4 X 20
tap, then screw the handles in place, put the plugs in and your are
all set.
By the way I put some pictures of my truck up at
http://www.javanet.com/~rmalouin/Dakota/fotoalbum.html
==
Buzz Malouin
Proud Dodge Dakoda Owner
1997 4X4 V6 Black/Mist ShortBed Towing/HeavyDuty/Handling/Tire/Skid
BucketSeats PowerOverheadConsole CarpetBedLiner/LEER100XLFiberglassCap
Tilt/Cruse 4SpeedAutomatic
_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:08 EDT