On Tue, 3 Feb 1998 10:03:38 -0600 (CST) Michael D Gemelke
<Michael.D.Gemelke@wdc.com> wrote:
>I feel like an idiot, and I probably am, but I'm going to ask
this
>question anyway.
>
>I tried to change the serpentine drive belt on my '95 V6 this
past
>weekend, and couldn't figure out which bolt to turn to get the
old belt
>off. My Hanes manual says to loosen THE bolt on the idler
pulley, rotate
>the pulley out of the way and remove the belt. It's got a big
arrow that
>points to some pulley, but it's unclear which one. The pulley
that it
>looks like they're pointing to has many bolts, so I'm confused.
I would
>think that you would loosen the tensioner, but that's not what
they seem
>to be saying. Can someone guide me through this procedure?
>
>Thanks for the help, folks.
>-Mike
>
On the front of the tensionor pulley is a Bolt.Use a socket
on a long breaker bar and turn to losen the tension on the belt.
Should take only a couple of minutes.
Karl Moltzan
92 CC 4X2 5.2L 4/5RT(stock cam)
1.7Crower, Electric Fans
DTs,Stock coil
B&M Shifter 4200lbs
15.054@90.124
kmoltzan@mymail.net
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:10 EDT