Ah, cool! I'll have to check into that! Thanks! Did you happen to
hear a price when you asked about it?
Richard Collins
> ----------
> From: david peterson[SMTP:kawi@hotmail.com]
> Reply To: dakota-truck@buffnet.net
> Sent: Thursday, February 19, 1998 6:26 PM
> To: dakota-truck@buffnet.net
> Subject: RE: DML: Pro Glass
>
> The FIPK seal is availible from Terry at Proglass for the V8. If you
> have a V6 much like myself you will have to be handy in fiberglass
> work.
> David Peterson
>
> >From: "Collins, Richard" <collinsr@ccmangum.com>
> >To: dakota-truck@buffnet.net
> >Subject: RE: DML: Pro Glass
> >Date: Thu, 19 Feb 1998 08:32:28 -0500
> >Reply-To: dakota-truck@buffnet.net
> >
> >The hood is $450 and that's all you can get from them. You'll have
> to
> >make your own box to seal off the FIPK.
> >
> >Richard Collins
> >
> >> ----------
> >> From: Stacy Clark[SMTP:clar8883@dpnet.net]
> >> Reply To: dakota-truck@buffnet.net
> >> Sent: Wednesday, February 18, 1998 7:32 PM
> >> To: dakota-truck@buffnet.net
> >> Subject: Re: DML: Pro Glass
> >>
> >> HoCollins, Richard wrote:
> >> >
> >> > The hood isn't specific to your engine so yes, you can use it on
> any
> >> 97+
> >> > Dakota. However, the Ram Air aspect of it won't do you much good
> >> unless
> >> > you develop some sort of setup to use the ports on the hood like
> the
> >> > sealed box around an FIPK or something else. It'll improve HP
> and
> >> gas
> >> > mileage if you set it up right.
> >> >
> >> > Richard Collins
> >> >
> >> > > ----------
> >> > > From: Stacy Clark[SMTP:clar8883@dpnet.net]
> >> > > Reply To: dakota-truck@buffnet.net
> >> > > Sent: Tuesday, February 17, 1998 8:51 AM
> >> > > To: dakota-truck@buffnet.net
> >> > > Subject: Re: DML: Pro Glass
> >> > >
> >> > > david peterson wrote:
> >> > > >
> >> > > > No, the sealed box is custom designed by Terry at Proglass.
> >> > > > Kawi@hotmail.com
> >> > > >
> >> > > > >Date: Mon, 16 Feb 1998 19:05:10 -0600
> >> > > > >From: Robert Trottmann <rotrottmann@davidson.edu>
> >> > > > >Subject: Re: DML: Pro Glass "Ram Air" Hood Info
> >> > > > >To: dakota-truck@buffnet.net
> >> > > > >Reply-To: dakota-truck@buffnet.net
> >> > > > >
> >> > > > >Does it come with the sealed box, or is that extra?
> >> > > > >
> >> > > > >Collins, Richard wrote:
> >> > > > >
> >> > > > >> Ok, for those of you interested, here's the contact info
> for
> >> Pro
> >> > > > Glass:
> >> > > > >>
> >> > > > >> Pro Glass
> >> > > > >> 11128 E CR 100 S
> >> > > > >> Avilla, IN 46710
> >> > > > >> (219)897-2597
> >> > > > >>
> >> > > > >>
> >> > > > >> I have photos of an install with the hood, etc from Power
> >> Wagon
> >> > > and
> >> > > > >> Sport Utes magazine scanning now so they'll be up on a WWW
> >> page
> >> > > in
> >> > > > less
> >> > > > >> than an hour from now. You can check them out at:
> >> > > > >>
> >> > > > >> http://www.ccmangum.com/collinsr/dakota/
> >> > > > >>
> >> > > > >> Later!
> >> > > > >>
> >> > > > >> Richard Collins
> >> > > > >> 98 CC 318 3.55LSD FIPK
> >> > > > >>
> >> > > > >>
> >> > > >
> >> > >
> >>
> ----------------------------------------------------------------------
> >> > > --
> >> > > > >>
> >> > > > >> Part 1.2 Type: application/ms-tnef
> >> > > > >> Encoding: base64
> >> > > > >
> >> > > > >
> >> > > > >
> >> > > > >
> >> > > >
> >> > > > ______________________________________________________
> >> > > > Get Your Private, Free Email at http://www.hotmail.com
> >> > > is his hood and ram air hook up available for the V-6???? and
> how
> >> much
> >> > > does the enire system cost??? What all does is improve???
> >> > >
> >> w much f
> >>
> >> How much for the entire set up ?????
> >>
> >
>
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:14 EDT