Re: codes

From: jim miller (jmiller@eramp.net)
Date: Wed Mar 04 1998 - 21:22:54 EST


Throttle position sensor maybe, Check to make sure you dong have a loose
vaccum line.

Dion Brownlee wrote:

> Quick question for the group. I have an 89 3.9L and I am currently having
> this problem....When the truck is cold all is well and then as it starts to
> warm up the following happens....The idle is fine but when you begin to
> slowly accelerate the thing almost dies, you can let off the gas and
> everything will settle down. When you accelerate with moderate to hard
> accleration everything is fine. I tend to think that this is ignition
> related and will probably try the cap and rotor change. Any ideas..thanks
>
> Dion



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:20 EDT